The flexible detector: ZETALIF DiscoveryTM
A Sensitive solution for HPLC, fast-LC and CE systems On-line CE-LIF-MS On-line LC-LIF-MS			A LIF solution for Agilent CE
High Sensitivity: 10 times to 100 times greater than conventional fluorescence and up to 100,000 times more sensitive than UV detection.
Modularity : Adaptable to CE and HPLC systems including Fast-LC, Capillary LC and nanoLC.
Versatility: 14 interchangelable different lasers availabls for any application
Selectivity: Low noise and interference molecules will be detected. Only labeled or native fluorescente			On-line CE LIF MS
Download the Brochure
ZETALIF Discovery Detector Specifications:
Capillary : OD: 365 µm to 460 µm ID : Refer to Table1	Capillary IDµm Estimated* cell Volume nL 25 0.2 50 0.4 75 0.9 100 1.6 150 3.5 320 16.1 Table1 : Capillary ID and Volume cell. *Based on 200 µm length of window
Two models are available : DIS-UV-02 Designed for lasers emitting at wavelengths from 266 to 650 nm. DIS-VI-02 Designed for lasers emitting at wavelengths from 410 to 780 nm with optimization of sensitivity for wavelengths from 514 to 650 nm.
Signal outputs: Analog (processed) 0-1V (DC), 0-100 mV (DC) Analog (direct) 0-1V (DC)
Available Lasers : Laser wavelength nm Source Power 266 Pulsed DPSS 2mW 325 Helium/Cadmium 10mW 355 Pulsed DPSS 2mW 410 Diode 20mW 473 Diode 30mW 488 Diode 25mW 514 Argon ion 40mW 532 DPSS CW 15mW 594 Helium/Neon 2mW 633 Helium/Neon 10mW 635 Laser Diode CW 20mW 650 Laser Diode CW 15mW 780 Laser Diode CW 40mW		Filter block: The Filter block depend on the laser and contain the appropriate excitation and emission filter. Zetalif Discovery detectors are adapted for the use with several lasers. Filter block depend on the laser and contain the appropriate excitation and emission filters. Contact Picometrics for more information
		Power requirements for the Detector: 100/120 VAC, 50/60 Hz, 0.63 A; 220/240 VAC, 50/60 Hz, 0.315 A
		Data Acquisition Systems: ZETALIF is compatible with any data acquisition system featuring an analog input (0-1 V). If no analog input is available, an A/D converter is necessary.
Distances: Detector / Cell : 1m (maximum) ; Detector / Laser : 1m (maximum)		Interface with CE system: Agilent CE: Internal Detector Adapter kit, UV cassette, and A/D converter (HP.35900E) are needed. Minimum capillary length total 33 cm/effective 14 cm. The system works with the ChemStation software. Beckman P/ACE MDQ: External Detector Adapter kit, MS cassette and an A/D converter (SS420-X)needed. Capillary length: total 53cm/effective 35cm.The system works with the 32 karat software. Other systems: please contact Picometrics.
Interface with HPLC system: ZETALIF Discovery is compatible with all LC systems but optimal sensitivity is acheived at flow rates < 0.5 mL/min. Lower sensitivity may be observed at higher flow rates.
Dimensions and weight: 34.0(H) x 17.0(W) x 34.0(D)cm/12,5 kg