The flexible detector: ZETALIF EvolutionTM
A Sensitive solution for HPLC, fast-LC and CE systems
High Sensitivity: 10 times to 100 times greater than conventional fluorescence and up to 100,000 times more sensitive than UV detection.		Versatility: 14 interchangelable different lasers availables for any application
Modularity : Adaptable to CE and HPLC systems including Fast-LC, Capillary LC and nanoLC.		Selectivity: Low noise and interference molecules will be detected. Only labeled or native fluorescente
Download the Brochure
ZETALIF EVOLUTION Detector Specifications:
Capillary : OD: 365 µm to 460 µm ID : Refer to Table1	Capillary ID ( µm) Estimated* cell Volume nL 25 0.2 50 0.4 75 0.9 100 1.6 150 3.5 320 16.1 Table1 : Capillary ID and Volume of Cell *Based on 200 µm window length
Two models are available : LIF-UV-01 Deseigned for lasers emitting at wavelengths from 266 to 488 nm LIF-VI-01 Deseigned for lasers emitting at wavelengths from 410 to 780 nm
Signal outputs: Analog (processed) 0-1V (DC), 0-100 mV (DC) Analog (direct) 0-1V (DC)
Available Lasers : Laser wavelength nm Source Power 266 Pulsed DPSS 2mW 325 Helium/Cadmium 10mW 355 Pulsed DPSS 2mW 410 Diode 20mW 473 Diode 30mW 488 Diode 25mW 514 Argon ion 40mW 532 DPSS CW 15mW 594 Helium/Neon 2mW 633 Helium/Neon 10mW 635 Laser Diode CW 20mW 650 Laser Diode CW 15mW 780 Laser Diode CW 40mW		Filter block: The Filter block depend on the laser and contain the appropriate excitation and emission filter. ZETALIF Evolution detectors are adapted for use of a broad variety of lasers. The filter block depends on the laser and contains the appropriate excitation and emission filters. Contact Picometrics for more information
		Power requirements for the Detector: 100/120 VAC, 50/60 Hz, 0.63 A; 220/240 VAC, 50/60 Hz, 0.315 A
		Data Acquisition Systems: ZETALIF is compatible with any data acquisition system featuring an analog input (0-1 V). If no analog input is available, an A/D converter is necessary.
Interface with HPLC system: Zetalif Evolution is compatible with all LC systems and optimal sensitivity is acheived at flow rates < 0.5 mL/min. Lower sensitivity may be observed at higher flow rates.		Interface with CE system:
		Agilent CE ® : External Detector Adapter kit, MS cassette, and an A/D converter (HP.35900E) needed. Capillary length total 55cm/effective 37cm. The system works with the HP Chemstation software.
Dimensions and weight: 34.0 (H) x 17.0 (W) x 34.0 (D)cm/12,5 kg		Beckman P/ACE MDQ ®: External Detector Adapter kit, MS cassette and an A/D converter (SS420-X)needed. Capillary length: total 53cm/effective 35cm.The system works with the 32 karat software.
		PrinCE® : For single lift models, capillary length: total 70cm/effective 50cm. (80/35 for double lift models). The system works with the DAX software. Other systems: please contact Picometrics.